Line Voltage Wave: PVC - 120V
technical data sheet
Legacy Product CODE
NL16E1012WE27K120J
NEW PRODUCT CODE
E2F1W1J2F2AF
PHysical
electrical
11.81in (300mm)
11.81in (300mm)
11.81in (300mm)
operating voltage
120V AC
Circuit type
N/A
power consumption
3.05W/ft (10W/m)
IC Type
N/A
2700K
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
25 LEDs/ft (84 LEDs/m)
temperatureS
Ambient Operating
-4°F to 95°F (-20°C to 35°C)
thermal management
Free air convection
Ambient installation
32°F to 95°F (0°C to 35°C)
max mounting surface
140°F (60°C)
fixture storage
-4°F to 140°F (-20°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
3.28in (83.3mm) (7 LEDs)
1 Connector
full / dynamic loads
65.6ft (20m) / N/A
2 Connectors
full / dynamic loads
N/A / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to ETL1598 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
120V ETL certified: Fuse + Barrel Connectors
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Silicone Flexible, Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
2700K
Fixture cri
80
fixture color tolerance
3 SDCM
wavelength/cct
2725±145K
led cri
82-87
led color tolerance
2.3SDCM
lumen count
116lm/ft (380lm/m)
BEAM angle
lumen maintenance
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories. PVC products maintain ≤3 SDCM within a production run and <6 SDCM between production runs Double Feeding is Prohibited. Max run length is based on static full load unless otherwise noted for dynamic use.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
