LumiForm LightStrip XL: Silicone 24V - Stainless Steel Mounting
technical data sheet
Legacy Product CODE
SS20IC122WEGRE24DVG
NEW PRODUCT CODE
I1J2T1C1G2CF
PHysical
electrical
3.94in (100mm)
3.94in (100mm)
3.94in (100mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
3.66W/ft (12W/m)
IC Type
Green
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip
led count
25 LEDs/ft (84 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
-40°F to 131°F (-40°C to 55°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
3.28in (83.3mm)
1 Connector
full / dynamic loads
49.2ft (15m) / N/A
2 Connectors
full / dynamic loads
98.4ft (30m) / N/A
safety / testing
jacket/base + LENS color
White + Transparent
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Silicone Seamless with Barrel Connectors
mounting
Stainless Steel In-Ground Rigid & Stainless Steel In-Ground Rigid Heavy Duty
optical pARAMETERS
color BReakdown
Green
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
522-528nm
led cri
N/A
led color tolerance
N/A
lumen count
98lm/ft (320lm/m)
BEEM angle
lumen maintenance
114.7°
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.The Constant Current (CC) Integrated Circuit extends max run length. Do not use a CC power supply, as it may cause damage.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Max run length is based on static full load unless otherwise noted for dynamic use.Bottom exit barrel connectors recommended.Maximum run length of the silicone diffuser is 98.42ft (30m).For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
