LumiForm LightStrip XL: Silicone 24V - Stainless Steel Mounting
technical data sheet
Order Code:
I1J2T3S1G3VF
Legacy Code:
SS20IC124WERGB24DVG
Profile Capabilities
3.94in (100mm)
3.94in (100mm)
3.94in (100mm)
Temperatures
Ambient Operating Temperature:
-40°F to 131°F (-40°C to 55°C)
Max Mounting Surface Temperature:
185°F (85°C)
Ambient Installation Temperature:
-40°F to 131°F (-40°C to 55°C)
Humidity (Non-Condensing):
0-95%
Fixture Storage Temperature:
-40°F to 140°F (-40°C to 60°C)
Thermal Management:
Free air convection
Certifications & Features
FLAME
UV
Solvent
Salt Water
UV
Solvent
Salt Water
Electrical
Operating Voltage
24V DC CV
Circuit Type
Constant Voltage (CV)
Power Consumption
3.66W/ft (12W/m)
IC Type
Fixture Specifications
LED Function
RGB PWM
LED Chip + CRI
Epistar SMD LED Chip
LED COunt
25 LEDs/ft (84 LEDs/m)
Order Unit (Cutting Unit)
3.28in (83.3mm)
Max Run Length: 1 Connector
(Full/Dynamic Loads)
32.8ft (10m) / 49.2ft (15m)
Max Run Length: 2 Connectors (Full/Dynamic Loads)
65.6ft (20m) / 98.4ft (30m)
UL Class 2 Max Run
TBA
LED COLOR
RGB
Cord Color
White (Black available upon request)
Jacket/base + Lens Color
White + Transparent
Connectors
Silicone Seamless with Barrel Connectors
Mounting
Stainless Steel In-Ground Rigid & Stainless Steel In-Ground Rigid Heavy Duty
OPtical Parameters
Color Breakdown
R; G; B; R+G+B
Wavelength/CCt
618-624nm; 522-528nm; 468-474nm; R+G+B
Lumen Count
14lm/ft (45lm/m); 40lm/ft (130lm/m); 6lm/ft (20lm/m); 59lm/ft (195lm/m)
LUMEN MAINTENANCE
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
Fixture cri
N/A
led cri
N/A
fixture color tolerance
N/A
led color tolerance
N/A
Safety/Testing + NOTES
UL CERTIFICATE #
UL 2108 Class 2
Report referance#
E347880/20130508
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
*Maximum IP and IK ratings achievable with appropriate accessories. Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details. Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs. Dynamic load calculations are not recommended for determining max distance of this profile. Max Run: Dynamic = RGB <100%; Full Load = RGB at 100%. Bottom exit barrel connectors recommended. Maximum run length of the silicone diffuser is 98.42ft (30m). For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling. Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
glls.com | 1.888.580.6366 | 1075 american pacific dr., sutie A, henderson, NV 89074
Version 2.0
Updated On
July 18, 2025
LumiForm LightStrip XL: Silicone 24V - Stainless Steel Mounting
technical data sheet
Legacy Product CODE
SS20IC124WERGB24DVG
NEW PRODUCT CODE
I1J2T3S1G3VF
PHysical
electrical
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
3.66W/ft (12W/m)
IC Type
RGB
fixture specifications
led function
RGB PWM
led chip + CRI
Epistar SMD LED Chip
led count
25 LEDs/ft (84 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
-40°F to 131°F (-40°C to 55°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%