Aqua Neon Wave High Output: Silicone - 24V
technical data sheet
Legacy Product CODE
SH16E0012WE40K24DCPO
NEW PRODUCT CODE
O1F2W1N2I2CD
PHysical
electrical
11.81in (300mm)
11.81in (300mm)
11.81in (300mm)
operating voltage
24V
Circuit type
Constant Current (CC)
power consumption
4.57W/ft (15W/m)
IC Type
N/A
4000K
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
33 LEDs/ft (108 LEDs/m)
temperatureS
Ambient Operating
-40°F to 122°F (-40°C to 50°C)
thermal management
Free air convection
Ambient installation
≥-40°F (-40°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
2.19in (55.6mm)
1 Connector
full / dynamic loads
16.8ft (5.12m) / N/A
2 Connectors
full / dynamic loads
N/A / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL676 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Silicone Submersible UL676
mounting
Silicone Flexible and Plastic Reinforced.
optical pARAMETERS
color BReakdown
4000K
Fixture cri
80
fixture color tolerance
3 SDCM
wavelength/cct
3985 ± 275K
led cri
N/A
led color tolerance
N/A
lumen count
244lm/ft (800lm/m)
BEAM angle
lumen maintenance
160°
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.The Constant Current (CC) Integrated Circuit extends max run length. Do not use a CC power supply, as it may cause damage.As per CLASS 2 power supply standards, the maximum allowable fixture power is limited to a single 100W supply.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Double Feeding is Prohibited.Max run length is based on static full load unless otherwise noted for dynamic use.For submersible underwater light fixtures with a power ≤16.5 W/m, the ambient working temperature range is -40°F to 95°F (-40°C to 35°C)For UL Class 2 calculations, GLLS uses a maximum output of 96 W / 96 VA for 24 V circuits, unless otherwise confirmed by the listed driver. All runs are assumed to be single-feed from one Class 2 output. Dual-feeding from separate drivers does not qualify as Class 2 unless the run is electrically split into isolated sections.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
