Sauna Flex Wave: Silicone - 24V
technical data sheet
Legacy Product CODE
SF16E0015WER2224DC6W
NEW PRODUCT CODE
S1F2P4H2C3VF
PHysical
electrical
11.81in (300mm)
11.81in (300mm)
11.81in (300mm)
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
1.82W/ft (6W/m)
IC Type
N/A
fixture specifications
led function
RGBW PWM
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
102 LEDs/ft (336 LEDs/m)
temperatureS
Ambient Operating
-40°F to 203°F (-40°C to 95°C)
thermal management
Free Air Convection
Ambient installation
-40°F to 122°F (-40°C to 50°C)
max mounting surface
203°F (95°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
100%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
3.28in (83.3mm) (28 LEDs)
1 Connector
full / dynamic loads
32.8ft (10m) / N/A
2 Connectors
full / dynamic loads
Not Recommended
safety / testing
jacket/base + LENS color
Opal + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Silicone Seamless
mounting
Aluminum: Basic, Recessed, Silicone Grip, Recessed Silicone Grip, Flexible. Plastic Reinforced, Stainless Steel Clip and Silicone Profile - Flexible.
optical pARAMETERS
color BReakdown
R; G; B; 2200K
Fixture cri
80
fixture color tolerance
N/A
wavelength/cct
618-624nm; 522-530nm; 458-464nm; 2238 ± 102K
led cri
N/A;N/A;N/A;82-87
led color tolerance
<3nm;<3nm;<3nm;<2.3SDCM
lumen count
11lm/ft (35lm/m); 30lm/ft (100lm/m); 5lm/ft (15lm/m); 20lm/ft (65lm/m)
BEAM angle
lumen maintenance
Wet Sauna 1.82W/ft (6W/m): L70 51,000 hours (@149°F, 65°C); (2) Dry Sauna 1.82W/ft (6W/m): L70 36,000 hours (@194°F, 90°C)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories. Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details. Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs. Due to fragility, five-wire fixtures are not recommended to exceed 16.4ft (5m). Max Run: Dynamic = RGBW <100%; Full Load = RGBW at 100%. Max run length is based on static full load unless otherwise noted for dynamic use. Install at least 31.5in (80cm ) away from heat sources. Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
