Vivid S160: Silicone - 24V
technical data sheet
Legacy Product CODE
SF11B1013WEGRE24DC
NEW PRODUCT CODE
V1C1W5C1G2CH
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
4.72in (120mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
3.66W/ft (12W/m)
IC Type
Green
10 Year Warranty
10 Year
24V DC
IK10 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
SPI-Pixel
led chip + CRI
Epistar SMD LED Chip
led count
17 LEDs/ft (56 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
-40°F to 122°F (-40°C to 50°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
UCS2903
4.92in (125mm) (7 LEDs)
1 Connector
full / dynamic loads
49.2ft (15m) / Not Recommended
2 Connectors
full / dynamic loads
98.4ft (30m) / Not Recommended
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Snap; Click; and Silicone Seamless.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
Green
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
522-528nm
led cri
N/A
led color tolerance
3nm
lumen count
107lm/ft (350lm/m)
BEEM angle
lumen maintenance
Square profile 160°
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.The Constant Current (CC) Integrated Circuit extends max run length. Do not use a CC power supply, as it may cause damage.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
