Vivid S160: Silicone - 24V
technical data sheet
Legacy Product CODE
SF11B1013WER3024DC
NEW PRODUCT CODE
V1C1W6L2I2CH
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
4.72in (120mm)
operating voltage
24V
Circuit type
Constant Current (CC)
power consumption
4.57W/ft (15W/m)
IC Type
UCS2904
RGBW-30K
fixture specifications
led function
SPI-Pixel
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
17 LEDs/ft (56 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
-40°F to 122°F (-40°C to 50°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
UCS2904
4.92in (125mm) (7 LEDs)
1 Connector
full / dynamic loads
32.8ft (10m) / 49.2ft (15m)
2 Connectors
full / dynamic loads
65.6ft (20m) / 98.4ft (30m)
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Snap; Click; and Silicone Seamless.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Silicone Flexible, Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
R; G; B; 3000K
Fixture cri
80
fixture color tolerance
<5SDCM
wavelength/cct
618-624nm; 522-528nm; 468-474nm; 3045 ± 175K
led cri
N/A; N/A; N/A; 82-87
led color tolerance
3nm; 3nm; 3nm; 2.3SDCM
lumen count
15.24lm/ft (50lm/m); 36.58lm/ft (120lm/m); 7.62lm/ft (25lm/m); 36.58lm/ft (120lm/m)
BEAM angle
lumen maintenance
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.The Constant Current (CC) Integrated Circuit extends max run length. Do not use a CC power supply, as it may cause damage.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.For UL Class 2 calculations, GLLS uses a maximum output of 96 W / 96 VA for 24 V circuits, unless otherwise confirmed by the listed driver. All runs are assumed to be single-feed from one Class 2 output. Dual-feeding from separate drivers does not qualify as Class 2 unless the run is electrically split into isolated sections.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
