Vivid S270: Silicone - 24V
technical data sheet
Legacy Product CODE
SF11D1012WERCJ24DC
NEW PRODUCT CODE
V1D1R1E1D2CH
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
4.72in (120mm)
operating voltage
24V DC
Circuit type
Constant Current (CC)
power consumption
2.43W/ft (8W/m)
IC Type
N/A
Red
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip
led count
22 LEDs/ft (72 LEDs/m)
temperatureS
Ambient Operating
-40°F to 140°F (-40°C to 60°C)
thermal management
Free air convection
Ambient installation
-40°F to 140°F (-40°C to 60°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
4.92in (125mm) (9 LEDs)
1 Connector
full / dynamic loads
65.6ft (20m) / Not Recommended
2 Connectors
full / dynamic loads
131.2ft (40m) / Not Recommended
safety / testing
jacket/base + LENS color
Red + Red
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Swivel; Snap; Click; and Silicone Seamless.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
Red
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
618-624nm
led cri
N/A
led color tolerance
<3nm
lumen count
27lm/ft (90lm/m)
BEEM angle
lumen maintenance
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.The Constant Current (CC) Integrated Circuit extends max run length. Do not use a CC power supply, as it may cause damage.Min. order qty: 656ft (200m). Actual color may vary slightly from listed Pantone due to production variations, custom color options available. Please contact your Account Manager.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Max run length is based on static full load unless otherwise noted for dynamic use.For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
