Vivid Wave: Silicone - 24V
technical data sheet
Legacy Product CODE
SF16E1012WEBLU24DV
NEW PRODUCT CODE
V1F1W1B1G3VA
No items found.
PHysical
electrical
No items found.
No items found.
No items found.
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
3.66W/ft (12W/m)
IC Type
Blue
10 Year Warranty
10 Year
24V DC
IK10 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip
led count
33 LEDs/ft (108 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free air convection
Ambient installation
-40°F to 131°F (-40°C to 55°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
0.72in (18.5mm) (2 LEDs)
1 Connector
full / dynamic loads
39.4ft (12m) / N/A
2 Connectors
full / dynamic loads
78.7ft (24m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Swivel, Click, Snap, DIY Submersible, Silicone Seamless & Silicone Submersible
mounting
Aluminum: Basic, Recessed, Silicone Grip, Recessed Silicone Grip, Flexible, Raceway and Raceway Suspended. Silicone Flexible, Stainless Steel Clip and Plastic Reinforced
optical pARAMETERS
color BReakdown
Blue
Fixture cri
N/A
fixture color tolerance
N/A
wavelength/cct
468-474nm
led cri
N/A
led color tolerance
<3nm
lumen count
34lm/ft (110lm/m)
BEEM angle
lumen maintenance
112.2°
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Max run length is based on static full load unless otherwise noted for dynamic use.For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
