Vivid Wave 320: Silicone - 24V
V1H2W1J2G2CD
technical data sheet
PHysical
electrical
11.81in (300mm)
11.81in (300mm)
operating voltage
24V DC CC
power consumption
3.66W/ft (12W/m)
IC Type
N/A
2700K
10 Year Warranty
24V DC CC
IK08 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
38 LEDs/ft (126 LEDs/m)
temperatureS
Ambient Operating
-40°F to 131°F (-40°C to 55°C)
thermal management
Free Air Convection
Ambient installation
-40°F to 131°F (-40°C to 55°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
2.19in (55.6mm) (7LEDs)
1 Connector
full / dynamic loads
49.2ft (15m) / N/A
2 Connectors
full / dynamic loads
98.4ft (30m) / N/A
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
cord color
White (Black available upon request)
connectors
End, side & bottom lead wires
mounting
Aluminum profile - self locking & aluminum profile - flexbile - self locking
optical pARAMETERS
color BReakdown
2700K
Fixture cri
80
fixture color tolerance
6SDCM
wavelength/cct
2725 ± 145K
led cri
82-87
led color tolerance
2.3SDCM
lumen count
320lm/ft (1050lm/m)
lumen maintenance
70,000 Hours L70 @ 25°C : 90,000 L50 @ 25°C 50,000 Hours L70 @ 50°C : 70,000 Hours L50 @ 50°C
NOTES
*The highest achievable IP rating with appropriate connector accessories & The highest achievable IK rating with appropriate mounting accessories.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
378 coverdale rd.,
unit a, riverview nb, E1B 3J7
disclaimer
glls, reserves the right to make any design changes for continuous impovement which will not affect the overall apperance or performance
