Vivid Light Strip XL: Silicone - 24V
technical data sheet
Legacy Product CODE
SS20IC122WE40K24DL
NEW PRODUCT CODE
V1J2T1N2E3VE
PHysical
electrical
3.94in (100mm)
3.94in (100mm)
3.94in (100mm)
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
2.74W/ft (9W/m)
IC Type
4000K
10 Year Warranty
10 Year
24V DC
IK08 Protection*
IP68 Protection*
INDOOR/
OUTDOOR
OUTDOOR
FLAME
RESISTANT
RESISTANT
UV
RESISTANT
RESISTANT
SOLVENT
RESISTANT
RESISTANT
SALT WATER
RESISTANT
RESISTANT
DIMMABLE
FIXTURE.
FIXTURE.
RDM/
DMX.
DMX.
fixture specifications
led function
Static
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
18 LEDs/ft (60 LEDs/m)
temperatureS
Ambient Operating
-40°F to 140°F (-40°C to 60°C)
thermal management
Free Air Convection
Ambient installation
-40°F to 140°F (-40°C to 60°C)
max mounting surface
185°F (85°C)
fixture storage
-40°F to 140°F (-40°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
N/A
0.66in (16.7mm) (1 LED)
1 Connector
full / dynamic loads
65.6ft (20m) / N/A
2 Connectors
full / dynamic loads
131.2ft (40m) / N/A
safety / testing
jacket/base + LENS color
White + Transparent
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Silicone Seamless
mounting
Aluminum Silicone Grip
optical pARAMETERS
color BReakdown
4000K
Fixture cri
80
fixture color tolerance
3 SDCM
wavelength/cct
3985±150K
led cri
82~87
led color tolerance
<2.3SDCM
lumen count
213.4lm/ft (700lm/m)
BEEM angle
lumen maintenance
N/A
L70 55,000 hours (@77°F, 25°C), 51,000 hours (@131°F, 55°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length, see connector specs for details.Silicone products maintain ≤3 SDCM within a production run and <5 SDCM between production runs.Max run length is based on static full load unless otherwise noted for dynamic use.For runs over 65.62ft (20m), recommended to limit each to 65.62ft for easier handling.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
