Vivid S160: PVC - 24V
technical data sheet
Legacy Product CODE
NF11B1015WR40K24DV
NEW PRODUCT CODE
V2C1W4N2I3VG
PHysical
electrical
4.72in (120mm)
4.72in (120mm)
4.72in (120mm)
operating voltage
24V DC
Circuit type
Constant Voltage (CV)
power consumption
4.57W/ft (15W/m)
IC Type
N/A
RGBW-40K
fixture specifications
led function
RGBW PWM
led chip + CRI
Epistar SMD LED Chip + CRI80
led count
18 LEDs/ft (60 LEDs/m)
temperatureS
Ambient Operating
-4°F to 113°F (-20°C to 45°C)
thermal management
Free air convection
Ambient installation
-4°F to 113°F (-20°C to 45°C)
max mounting surface
140°F (60°C)
fixture storage
-4°F to 140°F (-20°C to 60°C)
humidity non condensing
0-95%
Pixel/unit + chip
order unit (Cutting Unit)
max run length
3.94in (100mm) (6 LEDs)
1 Connector
full / dynamic loads
16.4ft (5m) / 26.2ft (8m)
2 Connectors
full / dynamic loads
32.8ft (10m) / 52.4ft (16m)
safety / testing
jacket/base + LENS color
White + Diffused
testing
Tested to UL2108 Class 2 by Underwriters Laboratory for use in the USA and Canada. Exceeds ANSI C78.377A, CE, and RoHS standards. Must be used under Class 2 ratings to maintain certification.
cord color
White (Black available upon request)
connectors
Snap; PVC Seamless; and PVC Submersible.
mounting
Aluminum: Basic; Recessed; Silicone Grip; Silicone Grip Recessed; Flexible; Raceway; Raceway Suspended. Plastic Reinforced and Stainless Steel Clip.
optical pARAMETERS
color BReakdown
R; G; B; 4000K
Fixture cri
80
fixture color tolerance
N/A
wavelength/cct
618-624NM; 522-528NM; 468-474NM; 3985 ± 275K
led cri
N/A; N/A; N/A; 82-87
led color tolerance
3nm; 3nm; 3nm; 2.3SDCM
lumen count
12.2lm/ft (40lm/m); 30.5lm/ft (100lm/m); 4.57lm/ft (15lm/m); 30.5lm/ft (100lm/m)
BEEM angle
lumen maintenance
Square profile 160°
L70 53,000 hours (77°F, @25°C), 51,000 hours (113°F, @45°C), based on 3.66W/ft (12W/m)
NOTES
*Maximum IP and IK ratings achievable with appropriate accessories.Max run length is based on silicone seamless connectors and excludes connector length—see connector specs for details.PVC products maintain ≤3 SDCM within a production run and <6 SDCM between production runsDue to fragility, five-wire fixtures are not recommended to exceed 16.4ft (5m).Max Run: Dynamic = RGBW <100%; Full Load = RGBW at 100%.Running length is based on voltage drop testing with a 0.3m (0.98ft) cable.
united states
1075 american pacific dr.,
sutie A, henderson, NV 89074
canada
470 Edinburgh Drive
2nd Floor, Moncton nb, E1E 2L1
disclaimer
glls, reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance
