Read Latest topics about LED fixtures from our blog

SR-2018B The Most Effective DMX-PMW Decoder for Your LED Neon Flex Project... This article will review our newest DMX-PMW Decoder product, the SR-2108B, and compare it to our previously used

It is a DMX to SPI decoder, but it was created with a very specific purpose and some might not be aware of its advantages.

When specifying your lighting project, it's important to consider the environment of the installation. GLLS offers a variety of different connector types to accommodate various installation requirements.

In other words, it is a method of communication used to tell electronic devices which actions to perform. We use it to control the lighting effects our fixtures can create, but it is capable of controlling much more than lighting.

In our last Tech Talk, we covered LED Neon Flex max run lengths. This week, we're going to discuss the differences between SLESA and DiGidot controllers as well as how to choose one

In our last Tech Talk, we discussed DMX channels and universes. This week we're going to take a look at max run lengths. What are max run lengths? Max run lengths call out

In our last Tech Talk, we discussed the difference between running a fixture at full load or dynamic load. This week we're going to cover the new terminology for LED Neon Flex fixtures

In our last Tech Talk, we covered the proper ways to bend LED Neon Flex. This week, we're going to take a look at the difference between running a fixture at full load

In our last Tech Talk, we discussed some commonly overlooked details. This week, we're going to take a look at how to properly bend an LED Neon Flex Fixture as well as a

In last week's Tech Talk, we covered how to effectively use mounting clips. This week, we're going to go over some commonly overlooked details while planning a project. What details get overlooked?

In our last Tech Talk, we covered the difference between open and closed face LED Light Panels. This week we're going to discuss how to recognize reverse polarity. What is reverse polarity?

In our last Tech Talk, we covered the differences between fixture profiles. This week we're going to show you how to most effectively use mounting clips. What are mounting clips? Mounting clips are

In our last Tech Talk, we covered how to cut your fixture and install snap connectors. This week, we're going to discuss the difference between Class 2 and Class II power

In our last Tech Talk, we covered recognizing reverse polarity. This week we're going to discuss the differences between LED Neon Flex profiles. LED Neon Flex fixtures come in a variety of sizes

In our last Tech Talk, we covered the difference between Class 2 and Class II power supplies. This week , we're going to talk about the difference between Open and Closed Face

In our last Tech Talk, we covered controlling an RGB fixture with the SLESA. This week, we're going to cover how to cut your fixture as well as how to install

In our last Tech Talk, we covered troubleshooting a decoder. This week we're going to cover the difference between 01 and 02 ends. When placing an order for LED Neon Flex

In our last Tech Talk we covered troubleshooting a static light fixture. This week, we're going to have a look at troubleshooting your DMX decoders. You've hooked up your DMX controller to

In our last Tech Talk, we talked about the difference between Snap connectors and Seamless connectors. This week, we're going to be covering the steps to troubleshoot a static fixture. When you're

In our last Tech Talk, we covered Rope Lights and SMD Fixtures. This week, we're going to take a look at the difference between Seamless connectors and Snap connectors. Seamless Connectors

This week, we're going to cover the differences between rope lights and SMD fixtures! Rope Lights Rope lights refer to LED lights that come in a round, tube-like casing. Typically, the

In our last Tech Talk, we covered testing a Vivid Pixel fixture. This week, we're going to cover voltage drop! It's important to understand voltage drop, and how wire gauge affects it

In our last Tech Talk, we covered testing resistance with a multimeter and ringing out pins.This week, we're going to cover testing a Vivid Pixel fixture with a DMX tester. This is

In our last Tech Talk, we covered testing your Vivid RGB fixture and wiring a Dimwheel. This week we're going to quickly cover ringing out pins and testing resistance with your multimeter.

Introducing GLLS's new Tech Talk blog! Since this is the first time we're posting, it makes sense to start with the basics! Today we're covering the (very) basic wiring for our various